Alkasol Flox is a formulation intended for the clearing of the swimming pool water and for coagulation of impurities in the water. Owing to the use of this agent, water becomes transparent and clear. The agent must be applied when the water in the swimming pool is turbid, even if the pH values and disinfectant content (chlorine and active oxygen) are correct. The formulation forms “flakes” from impurities, with the pH values ranging between 5.0 and 9.0.
Directions for use
Check the pH value of water - it should range between 7.0 - 7.4 - then the formulation works most effectively. In the case of any other values, use the pH corrector. Use 1.0 - 3.0 ml / m3 of the formulation for several days, until the “clean water” effect is obtained. The required dose must be mixed in a clean vessel with water and poured into the swimming pool. The larger flakes will fall to the bottom (they can be sucked out with a vacuum cleaner), the smaller ones will be retained in the filtering device. The formulation may be used in automatic dosing stations.