Extra Chlorine 1 kg
Description
Formulation for disinfection of water with a high content of active chlorine. Recommended particularly for quick disinfection in the case of the high content of algae in turbid water. Easy to use and dose. Extra Chlor is a product which effectively controls fungi, bacteria and algae in swimming pools. The formulation works very fast and for a long time. It is also simple in use and dosage.
Directions for use
Check the pH value of water - it should range between 7.0 - 7.4 - then the formulation works most effectively. In the case of any other values, use the pH value corrector (pH Plus or pH Minus ). The formulation is used in the amount of 4-6 g/m3/day during the filling of the swimming pool, and then 2-3 g/m3/day of water.
Dosage
Ideally Extra Chlor should be used upon prior dissolution in water. Then, it must be poured into the swimming pool, nearby the water supply. The active chlorine level in water should be 1 mg/l. If the content of active chlorine falls below 0.5 mg/l, apply the next dose of Extra Chlor. The content of the active chlorine in the swimming pool water and the pH reaction must be checked regularly by means of appropriate tests for the measurement of these parameters. Ideally Extra CHLOR should be used after prior dissolution in water. Then, it must be poured into the swimming pool, nearby the water supply. The active chlorine level in water should be 1 mg/l. If the content of active chlorine exceeds this value, wait until it falls to the appropriate level. The content of the active chlorine in the swimming pool water and the pH reaction must be checked regularly by means of appropriate tests for the measurement of these parameters. The dosing operation should ideally be performed in the evening, when there are no people bathing in the swimming pool. Never mix the formulations directly with each other. When the optimal parameters of water in the swimming pool are obtained, it is possible to start using the swimming pool.
NOTE
The dosing operation should ideally be performed in the evening <br/> when there are no people bathing in the swimming pool.
Application
The formulation is intended for control of algae, bacteria and fungi in swimming pools and for a fast increase in the content of active chlorine in the water.
The active substance
Sodium dichloroisocyanurate dihydrate < 95% w/w.
The biocidal product should be used with special precautions. Read the label and package insert before use.